 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
| YOUR ON-LINE POOL, SPA & PATIO SUPPLY! |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
||||
|
Alarms Brominators Cartridges, Filter Chemicals Chlorinators Chlorinators, Saltwater Chlorine Tablets Cleaners, Automatic Cleaning Equipment Deck Coatings Deck Equipment Dive Stands Diving Boards Exercise Filters Filter Cartridges Filter Systems Fittings Floats Flowmeters Fountains Gift Certificates Handrails Heaters Ladders Lights Liners Nature2 Systems Paint Patch & Repair Pool Covers Pool Frog Systems Pumps Safety Equipment Saltwater Chlorinators Slides Solar Blankets Solar Heaters Solar Reels Solar Sun Rings SPECIALS! Steps Test Kits Test Strips Thermometers Timers Unions Vacuum Release Valves Winter Covers Winterizing Equipment |
POOL PAINT
OPTILON POOL PAINT OPTILON
pool paint is a
quality synthetic rubber-base
formula meeting all of the high performance expectations
of chlorinated
rubber. OPTILON pool paint can be applied to bare concrete
or plaster
as well as over old rubber base coatings. OPTILON pool
paint also has
excellent chemical resistance and color retention while
yielding 2-3
years average service. Two coats of OPTILON pool paint are
required for
best results. On bare surfaces that are unusually porous,
a third coat
may be necessary. Coverage: 250 - 275 square feet average
per gallon. Optilon Directions
PLEASE NOTE: Synthetic rubber-base finishes may be
applied to
chlorinated
rubber and synthetic rubber. Chlorinated rubber may only
be applied
over chlorinated rubber.
PARALON 2 POOL PAINT Paralon 2 pool
paint is our
standard grade chlorinated rubber pool
enamel.
This pool paint is recommended for repainting existing
chlorinated
rubber coatings.
It is an attractive, low sheen, rubber base pool enamel
with high water
resistance. The soft pastel appearance will please the
most
discriminating pool owner while providing economical
protection for the
pool surface.
Two coats of PARALON 2 pool paint are required for best
results.
On bare surfaces that are unusually porous, a third coat
may be
necessary.
PARALON 2 pool paint meets Federal Specification TTP-95,
Type I, and
Class 3 for rubber base pool paints. Coverage: 250-275 sq.
ft. average
per gallon. Paralon 2 Directions
PLEASE NOTE: Synthetic rubber-base finishes may be
applied to
chlorinated
rubber and synthetic rubber. Chlorinated rubber may only
be applied
over chlorinated rubber.
HYDROLON POOL PAINT HYDROLON
pool paint is
a water-base acrylic enamel
designed for fast easy application on bare concrete or
plaster and over
an old rubber base finish. HYDROLON pool paint can be
applied to damp
surfaces and has no solvent vapors. The unique properties
of HYDROLON
pool paint make it perfect for seasonal commercial
application or for
use in indoor facilities. Two coats are required but a
third may be
necessary for unusually porous bare surfaces. Coverage:
250 - 300
square feet average per gallon. Hydrolon Directions
POXOPRIME II New Poxoprime II
epoxy primer lets you prime
over wet or dry surfaces.
Bare plaster or concrete can now be primed immediately
after cleaning.
No "drying out" time.
New Poxoprime II lets you complete an epoxy system coating
project in
as little as 24 hours.
After cleaning, priming with Poxoprime II, and overnight
cure, coat
with Zeron or Poxolon for a non-staining tile-like finish
that lasts
years and years.
For smooth bare surfaces. Coverage: 100 to 150 SQFT. per
gallon. Poxoprime Directions
GUNZITE Gunzite,a two-part epoxy
primer, is used for
priming rough bare
surfaces that require a high build primer to smooth out
the surface.
The heavy viscosity of Gunzite acts as a fill coat on
these surfaces
and provides a much smoother surface.
Gunzite should only be used as an undercoat for Poxolon or
Zeron.
Especially effective on sandblasted surfaces.
Gunzite gives you that professional look of a liquid tile
finish.
Coverage: 100-150 sq. ft. per gallon. Gunzite Directions
BONDERITE BONDERITE
primer is specifically
formulated for use over
bare aluminum pool surfaces. This material is a two-part
epoxy that
should be applied by roller or spray over sanded aluminum.
Two coats
are recommended for maximum protection. BONDERITE should
be used as an
undercoat for POXOLON and ZERON. Coverage: 200 - 250
square feet per
gallon.
Paint
Is
Not
Returnable.
STEEL PRIMER STEEL PRIMER
is for bare steel pool
surfaces. Bare steel
must be sandblasted, degreased and primed immediately.
Coverage: 200 -
250 square feet per gallon. Paint Is Not Returnable.
FUSION PLUS FUSION PLUS
is the smart way to
convert your worn
rubber-base coated pool to an epoxy finish. Simply clean
surface, roll
on FUSION PLUS, then follow with one coat of ZERON or two
coats of
POXOLON. Your rubber-to-epoxy finish will be beautiful,
and will last
for years.
Coverage: Approximately 225 - 250 square feet per gallon Paint Is Not Returnable.
POXOLON 2 EPOXY POOL PAINT Poxolon 2
epoxy pool paint is a
high gloss epoxy pool paint that is
easy to apply and should yield up to five years of
service.
This finish is very easy to clean as is the case with all
epoxy pool
paint.
You may use Poxolon 2 epoxy pool paint on most
conventional pool
surfaces with excellent results.
Unpainted pool surfaces will require a prime coat
(Poxoprime II or
Gunzite) to insure good adhesion.
Recommended for use by pool service companies and the do
it yourself
pool owner.
Use with primer on concrete, plaster, fiberglass and metal
pools.
Two finish coats of Poxolon 2 epoxy pool paint are
required in all
cases.
Poxolon 2 epoxy pool paint may be applied by either
airless sprayer or
roller. Coverage: Approximately 225-250 sq. ft. per
gallon. Poxolon 2 Directions
ZERON EPOXY POOL PAINT Zeron epoxy pool
paint is the
longest lasting epoxy pool paint
available.
You can expect up to eight years of service from one
application of
this product.
Unpainted surfaces will require one coat of primer
(Poxoprime II or
Gunzite).
The greatest advantage of Zeron epoxy pool paint is that
it only
requires one coat.
Zeron epoxy pool paint is a heavier bodied material than
Poxolon so it
will require a little more effort in its application and
will not
spread as far.
However, due to the extremely long life of ZERON epoxy
pool paint, the
cost per year of service is lower than any other pool
coating
available.
This coating may be applied by roller or airless spray
equipment.
Zeron epoxy pool paint is highly recommended for
professional pool
builders and pool service companies as an alternative to
traditional
pool plaster.
The finished surface will stay brighter and will be easier
to keep
clean than a plastered pool. Custom colors available.
Coverage:
Approximately 125-175 sq. ft. per gallon. Zeron Directions
DIVING BOARD REPAIR KIT The Olympic Diving
Board Kit
helps provide sure footing to worn out
diving boards.
Each Diving Board Kit contains one quart of Super Convoy,
one pint
thinner, roller cover and complete instructions.
Can be applied to fiberglass or aluminum with excellent
results.
Super Epoxy Convoy coating will help prevent dangerous
slips and falls.
For over 50 years, Super Convoy has been used to safeguard
diving
boards, shower floors, locker rooms, steps, coping,
concession areas
and other "slippery when wet" areas.
Super Convoy will greatly reduce liability risks.
This two-component, high solids product gives a high
profile finish to
increase friction while remaining comfortable to the
touch.
It can be applied to clean, dry, and sound surfaces. No
maintenance is
required and it will remain durable for years. Diving Board Repair Kit Directions
MISCELLANEOUS
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
